Home Lathes Spares and Replacement Parts Knobs, Hand Wheels & Handles
If you have a coupon for our shop then enter it here:
Click for more...
This handle is used for the back gear shifting mechanism on the mini lathe.
This is the handle that engages the half nuts.
This hand wheel is used on the saddle drive and the tailstock of the mini lathe.The hand wheel is 80 mm in diameter. It mounts on a 8 mm shaft, with a set screw. The length through the bore is 22 mm. There is an M6 threaded hole for a handle.
This is the handle used on the saddle drive hand wheel. It includes the knob, an M6 screw and an M6 locking nut.
This knob is used on the high/low speed shifter of both the mini lathe and the mini mill and on the Z-axis coarse feed on the mini mill.
This is the handle that locks the tailstock quill.
