Metal Change Gear set for thread cutting - IMPERIAL

11 piece Metal Change Gear set for the 7 x 14 Real Bull Mini-Lathe CJ18A

Sizes (Teeth): 30, 35, 40, 40, 45, 50, 55, 57,60,60 and 65
Bore: 12mm
Width: 8 mm
Keyway: 4 mm

Metal 45 Tooth Gear

CJ18 Metal Gears Set

CJ18 Metal Gears Set

1 CJ18 Hi-Lo Metal Gear 18T/30T
1 CJ18 Hi-Lo Metal Gear 31T/43T

Fits the Chester Conquest lathe

Change Gears Set (Metric) for thread cutting

- Module 1 Metric gears
- Bore 12 mm
- Keyway 4mm
- Width 8 mm

Complete set of change gears for the mini lathe. Includes the following:

1 x 30 Tooth gear
1 x 35 Tooth gear
2 x 40 Tooth gear
1 x 45 Tooth gear
2 x 50 Tooth gear
2 x 60 Tooth gear

*Please use picture as reference. Kindly refer to the description above for a more accurate description/specification.

Metal Change Gear Set Metric for thread cutting

9 piece Metal Change Gear set for the 7 x 14 Real Bull Mini-Lathe CJ18A

Sizes (Teeth): 30, 35, 40, 40, 45, 50, 50, 60 and 60.
Bore: 12mm
Width: 8 mm
Keyway: 4 mm

Diametrical Pitch: 26

Saddle Drive Gear - 24T (Part #82)

Saddle drive gear (24T).

Saddle Drive Gear - 11T/54T (Part #81)

Saddle drive gear (11T/54T). This gear engages the rack on the bed.

Used on:
CJ18 7x12 & 7x14 Mini-Lathe
Homier 7x12 Mini Lathe
Harbor Freight 7x10 Mini Lathe
Cummins 7x12 Mini Lathe
Micro-Mark 7x12 Mini Lathe
Micro-Mark 7x14 Mini Lathe
Grizzly 7x12 Mini Lathe

45 Tooth Gear (Part #45)

This is one of the threading change gears. It is also used in the lead screw drive train of the mini lathe.

- 45 Teeth
- Module 1 Metric gear
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm

80 Tooth Gear METAL (Part #59)

Metal Mini lathe lead screw drive gear 80 Teeth

- 80 teeth
- Module 1 Metric gear
- Bore 12 mm
- Keyway 4 mm
- Width 8 mm

Overall diameter: 82mm

80 Tooth Gear (Part #59)

Mini lathe lead screw drive gear.

- 80 teeth
- Module 1 Metric gear
- Bore 12 mm
- Keyway 4mm
- Width 8 mm

2 speed spindle Gear - Hi-Lo (for CJ18 series mini-lathe & XJ12-300 mini-milling machines) 21/29T

Transmission gear, 2-speed spindle.
This gear goes on the spindle of the mini lathe and mini mill.

This is the larger of the two transmission gears. It has 21 Teeth on one end and 29 teeth on the other.

2 speed spindle Gear - Hi-Lo (for CJ18 series mini-lathe & XJ12-300 mini-milling machines) - 12/20T

Transmission gear, 2-speed spindle.
This gear goes on the spindle of the mini lathe and mini mill.

This is the smaller of the two transmission gears. It has 12 Teeth on one end and 20 teeth on the other.